Delivery time between 2 – 10 days.

Adjustable to all the most common wheel sizes.

Up to 150 kilos, although the bikes that weigh more (maximum 200 kg) we suggest that you send us an email and we will give you a solution.

The 150 cm ramp can be stored underneath provided the motorcycle is light and the person is able to withstand this effort.

The long ramp must be stored independently with the carrier.

Normally we will always have fixed the rails with a screw through each end (One at the beginning and one at the end). With 2 screws it is enough but you can put it up to 6.

If it can be removed with two screws we will have drilled through the installation but the practical month is to leave the rails and take out the rest.

This system is designed to load the bike safely, so we have the pins that must be inserted to block the ramp and the axle, preventing them from leaving.

Yes, although the bike is straight and fixed with pins. It is mandatory to tie the bike with at least 2 strings, one on each side.

It is very important to adjust very well the axle that holds the wheel in the size of the wheel, so the wheel will be pressed and the bike will stay straight, otherwise it could fall.

There is the possibility of installing the carrier in a diagonal or cross-section, taking into account that the entrance should be centered.

If you have a low bike it is likely that there is more inclination causing the bike to touch the ramp, so we recommend the help of the chocks under the ramp.

Yes, it works exactly the same but it is necessary to communicate it to supply the appropriate parts.

Yes, the standard measurement is 2 meters, but if the length of the garage is shorter, on request we can do it without any additional cost.